Skip to content

Cashier sign-in and PINs

MyShopie POS keeps the tablet and the person separate. The tablet holds a long-lived register token from enrollment, which proves it is a till you authorised. The person signs in on top of that with a short-lived cashier session, started with their own POS login PIN or an NFC badge. Every sale, void and cash count is then attributed to a named member of staff rather than to a lane.

Plans: Retail, Growth, Enterprise

Requires app: Point of Sale. Install Point of Sale from Settings → Apps before these screens appear.

  • The register is enrolled. See Registers and devices.
  • Each cashier exists as a member of staff with the use_pos permission.
  • You have edit_settings to change the session rules, and edit_users to set someone else’s PIN.

These apply to every register in the store, not per lane.

  1. Open Dashboard → POS → Settings.

  2. Set Idle timeout in minutes. This is how long a signed-in cashier can leave the tablet untouched before the session ends and the tablet returns to the sign-in screen. The default is 5 minutes, and the accepted range is 1 to 1440.

  3. Set Absolute session in minutes. This is a hard ceiling on a session regardless of activity — useful if you want sign-in to be a per-shift act rather than a per-day one. 0 means no cap, and the range is 0 to 1440.

  4. Choose which sign-in methods are allowed: PIN login and badge login. Leave at least one enabled, or nobody can start a session.

  5. Save. Changes apply to sessions started after the save; a session already running keeps the rules it started under.

A POS login PIN is a separate credential from a staff member’s dashboard password. It exists so signing in at a counter takes a couple of seconds and leaks nothing useful if it is overseen.

  1. For yourself: in the dashboard, open your own profile and set your POS login PIN. This is the preferred route, because nobody else ever knows the value.

  2. For someone else: with edit_users, open Settings → Staff, choose the person and set their POS login PIN. Treat it as temporary and ask them to change it.

  3. Confirm the person can sell. A PIN starts a session; the use_pos permission lets that session trade. A cashier with a PIN and no use_pos will sign in and then be unable to complete a sale.

If badge login is enabled, a member of staff can tap an NFC badge instead of typing. With edit_users, assign a badge to a staff member from Settings → Staff, and remove it the same way when the badge is lost or the person leaves. Removing a badge takes effect at once; it does not end a session already running, so sign that session out as well if the badge went missing mid-shift.

  1. The enrolled tablet shows the sign-in screen with the register’s name.

  2. The cashier enters their PIN, or taps their badge.

  3. The session starts. If no shift is open on that register and the cashier has open_shift, the app prompts to open one with a cash float. See Shifts and cash handling.

  4. At the end of a turn at the till, the cashier signs out explicitly rather than walking away. The idle timeout is a safety net, not a procedure.

Sign-in attempts are rate limited per register. Repeated wrong PINs will be throttled, which is deliberate — a four-digit PIN is only safe because guessing it is slow.

Setting Default Range Effect
Idle timeout (minutes) 5 1–1440 Session ends after this long with no interaction
Absolute session (minutes) 0 0–1440 Hard session ceiling regardless of activity; 0 = no cap
Allow PIN login On on / off Staff may sign in by typing their POS login PIN
Allow badge login — on / off Staff may sign in by tapping an assigned NFC badge

Reference — permissions that matter at the till

Section titled “Reference — permissions that matter at the till”
Permission What it unlocks
use_pos Completing sales, counting cash mid-shift, recording a no-sale
open_shift Opening a shift with a float
close_shift Closing a shift and performing a handover
pos_refund Refunds and exchanges against a past sale
authorize_pos_override Approving another cashier’s void or price override
view_reports Reading the shift and override reports in the admin
edit_users Setting another person’s POS login PIN or badge
edit_settings Changing the POS session rules and managing registers

The tablet keeps returning to the sign-in screen. The idle timeout is shorter than the natural gaps between customers. Raise it in Dashboard → POS → Settings.

A cashier is signed out in the middle of a sale. Either the absolute session cap expired, or somebody re-enrolled the register from another tablet. Re-enrollment signs out the active cashier immediately; check the enrollment time in the device panel.

Nobody can sign in at all. Both PIN and badge login are disabled. Enable at least one.

A PIN is rejected that the cashier is sure about. Too many recent failures on that register will be throttled. Wait, then try once carefully rather than repeatedly.

Sign-in works but the Pay button does nothing. The account is missing use_pos.

Why are there two credentials — a device token and a PIN? They answer different questions. The register token proves the tablet is a till you authorised, and it is long-lived. The cashier session proves who is standing at it, and it is short-lived. Separating them means a cashier changing their PIN never un-pairs a tablet, and losing a tablet never forces every cashier to change a PIN.

Can two cashiers share a PIN? Nothing stops you, and you should not. The PIN is what attributes a sale, a void and a cash variance to a person. A shared PIN turns every report in the override log into a dead end.

What does an idle timeout of 5 minutes actually do? After five minutes with no interaction the cashier session ends and the tablet returns to the sign-in screen. The register stays enrolled and any open shift stays open, so the next person signs in and carries on.

How do I set the absolute session cap? Dashboard → POS → Settings, the Absolute session field, in minutes. Zero means no cap, so the session only ends on idle timeout or explicit sign-out. Setting it to roughly the length of a trading shift is a reasonable starting point.