Registers and devices
A register in MyShopie is one checkout lane — a physical spot where a customer pays. It belongs to an inventory location, it has its own name and code on receipts and reports, and it pairs with exactly one Android tablet. Creating registers and pairing their tablets is the setup work that has to happen before anyone can sell in person.
Plans: Retail, Growth, Enterprise
Requires app: Point of Sale. Install Point of Sale from Settings → Apps before these screens appear.
Before you start
Section titled “Before you start”- The POS app is installed under Settings → Apps.
- At least one inventory location exists and holds stock. A register sells from its location’s stock, so pointing a register at an empty location means an empty catalog on the tablet.
- You have the
edit_settingspermission. Creating registers and managing devices is a settings-level action, deliberately separate from the permission to sell. - The tablet has the MyShopie POS app installed and can reach the internet for enrollment.
Create a register
Section titled “Create a register”-
Open Dashboard → POS → Registers.
-
Choose Add register.
-
Pick the Location. This is required and it is the decision that matters most — it fixes which stock this lane sells and reduces. It cannot be casually changed later once the lane has traded, because past sales are attributed to it.
-
Give the register a Name staff will recognise, up to 100 characters. “Front counter”, “Till 2”, “Pop-up stand” all work better than “Register 1”.
-
Optionally set a Code, up to 50 characters. This is the short identifier that reads well on receipts, Z-reports and exports —
FC1,T2. -
Set the Role: standard or master. Use master for the supervisor lane where approvals and cash handovers normally happen, and standard for everything else.
-
Save. The register appears in the table as inactive with no device and no open shift. That is expected — it becomes usable once a tablet is enrolled.
Pair the tablet
Section titled “Pair the tablet”The pairing flow starts on the tablet, not in the browser, because the tablet is what has to end up holding the token.
-
On the tablet, open the MyShopie POS app and sign in as a member of staff who can manage devices.
-
Choose the store and then the register you created. The list shows registers at the locations you have access to.
-
Tap Enroll. The app sends its device identifier, receives a register token and stores it locally. The browser’s device panel now shows the register as enrolled, with the paired device identifier, the enrollment time, and later the time the token was last used.
-
Back in Dashboard → POS → Registers, confirm the row shows active with a device attached.
Replace, recover or retire a tablet
Section titled “Replace, recover or retire a tablet”Open the device panel from the register’s row in Dashboard → POS → Registers.
| Situation | Action | What happens |
|---|---|---|
| New tablet replacing an old one | Re-enroll from the new tablet | The new device identifier replaces the old one; the old tablet’s token stops working |
| Tablet lost or stolen | Unpair | The register token is revoked at once; the tablet can no longer reach your store |
| Tablet wiped or app reinstalled | Re-enroll from the tablet | The device enrolls fresh; nothing needs clearing in the admin first |
| Lane closed for good | Unpair, then set the register inactive | Past sales and shifts stay attached to the register for reporting |
Unpairing is the safe default when something has gone wrong. It is immediate, it is reversible by enrolling again, and it never touches trading history.
Reference — register fields
Section titled “Reference — register fields”| Field | Required | Limit | Notes |
|---|---|---|---|
| Location | Yes | — | Fixes which stock this lane sells and reduces |
| Name | Yes | 100 characters | Shown on the tablet, receipts and reports |
| Code | No | 50 characters | Short identifier for receipts and exports |
| Role | Yes | standard or master |
Master marks the supervisor lane |
| Status | — | active / inactive | Becomes active once a device is enrolled |
Reference — the device panel
Section titled “Reference — the device panel”| Item | Meaning |
|---|---|
| Enrollment state | Whether a device currently holds a valid register token |
| Paired device | The identifier of the bound tablet |
| Enrolled at | When the current pairing was created |
| Token last used at | The last time this register made a request — the fastest way to tell a quiet lane from a broken one |
| Re-enroll | Replace the bound device; signs out the active cashier |
| Unpair | Revoke the token immediately |
Advanced: an unbound token
Section titled “Advanced: an unbound token”The device panel also offers issuing a token that is not bound to a device identifier. This exists for integrations and bench testing, not for day-to-day setup — the POS app does not have a field to paste a token into. Prefer Enroll from the app in every normal case. An unbound token is a credential that works from anywhere, so treat it like one: issue it only when something genuinely needs it, and unpair when you are done.
Common problems
Section titled “Common problems”The register stays inactive after enrolling. Reload the Registers screen. If it is still inactive, the enrollment did not complete — check that the tablet had connectivity and that the staff account used in the app can manage devices.
“Token last used” is hours old on a lane that is trading. The tablet is selling offline and queueing. See Offline selling and sync.
The catalog on the tablet is empty or wrong. The register is pointed at the wrong inventory location. Check the Location column in the Registers table against the shop the tablet is standing in.
A cashier is signed out every time another manager touches the lane. Someone is re-enrolling rather than signing in. Enrollment is a once-per-tablet job; daily use is cashier sign-in.
What is the difference between a standard and a master register? A master register is the lane you treat as the supervisor till — use it for the counter where a manager is normally present and where approvals and cash handovers happen. Standard is every other lane. Both sell identically.
Can two tablets share one register? No. A register binds to exactly one device identifier. Enrolling a second tablet on the same register replaces the first and signs out whoever was using it.
A tablet was stolen. What do I do? Open Dashboard → POS → Registers, open the device panel for that register and choose Unpair. The register token stops working immediately, so the tablet can no longer reach your store even if it still has the app installed.
Do I have to type a token into the tablet? No. The normal flow is a manager tapping Enroll inside the POS app, which pairs the device and stores the token for you. The advanced unbound-token option exists for integrations, not for the app.
